10
English
2
2
Open the water tank cap, hold
the main unit so it is level, and
fill the tank with water.
•
Always use new tap water or
lukewarm water.
•
If the water feels cold, use lukewarm
water with a temperature of 40 °C or
less.
3
3
Close the water tank cap,
making sure it locks in place�
4
4
Press the mode switch and select the
desired water jet mode�
•
The mode indicator will glow the previously
selected mode. If the appliance is not used for
more than 30 days, or after the appliance has
been fully charged from its fully discharged state,
the mode is initialized to AIR IN (SOFT). (When
the battery is drained, the mode will be reset but
this is not a fault.)
•
If you want to use a different mode, press the
mode switch until it changes to the desired
setting. Pressing the mode switch will change the
mode from AIR IN (SOFT) to AIR IN (REGULAR)
to JET to INTERDENTAL.
Mode
Description
JET mode (indicator glows)
•
A fully filled water tank provides
approximately 35 seconds of use.
This mode is for concentrated care
of the zones between the teeth with
strong water flow.
INTERDENTAL mode (indicator blinks)
•
A fully filled water tank provides
approximately 2 minutes of use.
This mode is for concentrated care
of the zones between the teeth with
intermittent water flow.
AIR IN (REGULAR) mode
•
This mode is for periodontal pocket
cleaning and gum care.
AIR IN (SOFT) mode
•
This mode is for gently massaging
the gums.
EW1413_KOR.indb 10
2020/07/21 14:01:32