Great user manuals database on
Ref. No. 2D
Procedure 2A
→
→
→
→
2C
→
→
→
→
2D
Removal of the gear box block.
1. Loosen the 4 screws where securing the driving block with the
housing in order to take out the gear box block from the main unit.
2. Remove the 4 screws and carefully open the gear box housing.
NOTE:
The internal parts of gear box block can be removed one after
another.
NOTE:
The spring of spindle lock button may pop out.
Ref. No. 2E
Procedure 2A
→
→
→
→
2C
→
→
→
→
2D
→
→
→
→
2E
Assembly of the motor assembly.
1. Take out the motor rotor assembly from the motor stator.
2. Take out the current case.
3. Remove the 2 screws fastening the motor stator.
4. Take out the stator.
5. Take out the motor brush and switch assembly connected with
lead wires.
NOTE:
Loosen the 2 housing screws and take the housing C out for re-
assembling purpose.
6
EY3551-U1 / EY3552-U1