- 9 -
Dust Collection Cup (EY9X004)
... (L)
* Drill bits of which diameter is 20 mm
above cannot be inserted through
dust collection cup.
* Do not use the tool for cutting other
than concrete, mortar and other ceram-
ic materials. If used for cutting metal
materials, the dust collection cup may
be damaged by the metal chip heat.
1. Install a dril bit.
2. Pass the drill bit through A and fix
the cup at B by matching with the
shape of the support handle.
A B
Operation
Keep the dust collection cup in close
contact with the wall surface during
operation.
Removal
Hold the base of the dust collection
cup for removal.
Please remove after thoroughly get-
ting rid of the dust in the dust collec-
tion cup.
Base
Storage
Do not store the dust collection cup
in a compressed position. If kept in a
compessed position, it may be impos-
sible to return to the original shape.
. MAINTENANCE
Use only a dry, soft cloth for wiping
the unit. Do not use a damp cloth,
thinner, benzine, or other volatile sol-
vents for cleaning.
. ACCESSORIES
Optional
attachment
Can be used in:
Hammer-
ing mode
Drillring
mode
Drill chuck
EY9HX400E
No Yes
dia.1.5mm 13mm (1/16
1/2 )
Wood drill
Metal drill
Don't in hammering mode.
Hammer chuck
EY9HX401E
Yes Yes
dia.2.5mm 13mm (3/32
1/2 )
Masonry drill bit with
straight shank
(for bricks, mortar, cinder
block, Aired Light Concrete
drilling only)
Wood drill
Metalwork drill
Chiseling
attachment
EY9HX402E
Yes No
Light weight chiseling.
Peeling off tiles
Making ditch for plumbing
Basement trimming
