■
HOW TO DISASSEMBLE MAIN UNIT.
Ref. No. 2A
Procedure 1A
→
→
→
→
1B
→
→
→
→
2A
Removal of the switch.
1. Take out the heat sink from the housing by something like a plier.
2. Take out the battery holder from the housing.
3. Remove the trigger cover.
For assembling
NOTE:
Make sure to set the trigger cover into the groove of housing.
Ref. No. 2B
Procedure 1A
→
→
→
→
1B
→
→
→
→
2A
→
→
→
→
2B
Removal of the motor assembly.
1. Hitch the brush spring to the frame by something like a forceps and
take the motor brush assembly with the switch out from the motor
assembly.
2. Take out the rotor and the current plate from the motor case.
For assembling
NOTE:
Make sure to return the spring into the groove of the motor brush.
Make sure to align the groove of motor case and the groove of
current plate. And set the largest groove of the motor case onto
the boss of housing.
4
EY6813-U1
