- 19 -
EN
[For business users in the European Union]
If you wish to discard electrical and electronic equipment, please contact your dealer or
supplier for further information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items,
please contact your local authorities or dealer and ask for the correct method of disposal.
IV. MAINTENANCE
•Use only a dry, soft cloth for wiping the unit.
Do not use a damp cloth, thinner, benzine, or other volatile solvents for cleaning.
•In the event that the inside of the tool or battery pack is exposed to water, drain and allow
to dry as soon as possible. Carefully remove any dust or iron filings that collect inside the
tool. If you experience any problems operating the tool, consult with a repair shop.
V. OPTIONAL ACCESSORIES
•Use only suitable size of bit.
•Panasonic original optional quick
change chuck (EY9HX131E).
Chuck Size: 6.35 mm hex
EY9HX131E CAUTION:
Do not use the unit to drill holes into
wood and metal.
VI. APPENDIX
MAXIMUM RECOMMENDED CAPACITIES
Model No.
EY75A7
EY75A8
Screw
driving
Wood screw
Φ 3.5 mm – Φ 9.5 mm
—
Self-drilling screw
Φ 3.5 mm – Φ 6 mm
Bolt fasten-
ing
Standard bolt
M6 – M16
M10 – M20
High tensile bolt
M6 – M12
M10 – M16
WARRANTY SUPPLEMENT
•The breakdown and damage caused by usage consistent for a long time (e.g.: factory
work on the assembly line, etc.) is out of warranty.
•In the event that the inside of the tool or battery pack is exposed to water, drain and allow
to dry as soon as possible. Carefully remove any dust or iron filings that collect inside the
tool. If you experience any problems operating the tool, consult with a repair shop.
VII. SPECIFICATIONS
NOTE:
Weight indication
Greater than or equal to 1 k
g
: indicated by 0.05 k
g
.
Less than 1 k
g
:
indicated by 0.01 k
g
.
