12
(There is no distinction between inside and outside,
upper and lower.)
(There is distinction between inside and outside, no
distinction between upper and lower.)
Remove the tank, fill it with
water, then install it back.
(Not required if the product operates
in the mode of “Clean Air.”)
Make sure to disconnect the
power plug before filling water.
Install the filters (2 types) and front
panel.
Make sure to attach the front panel before use.
Install deodorizing filter.
Install HEPA composite filter.
Install front panel.
The upper position and lower position of the
tank shall be reversed when you fill it with
water to that when you install it back.
Tank
Please check whether
the anti-fungus
assembly is installed
properly (P.19).
Anti-fungus
assembly
Press the hook, and remove the tank.
Tank
Hook
Remove the cover.
Tray
Install filters
Fill water into tank
Fit the clutch into the indentation
(2 places) of the product.
Push in the protrusion into holes (2 places) of product
and press properly.
水盤
SETUP
Concave part
of the product
With the black side (front side )
toward yourself, fit it into the
concave part of the product.
將黑色面(正面)朝外
，
放入機體的
凹部
。
機體的凹部
设置
安装过滤网
加水至水箱
安装过滤网(
2
种)和前面板。
安装脱臭过滤网。(无内外、上下的区分。)
安装
HEPA
多功能过滤网。(有内外的区分、无上下的区分。)
安装前面板。
使钩爪与产品上的凹槽
(
2
处)咬合。
使用前请务必安装好前面板。
Notice
提示事项
将前面板的凸起处插入产品上的小孔
(
2
处)，并且向下按到底。
取出水箱加水，并装回水箱。
(空气净化模式运转时，不需要加水。)
加水前，请务必拔出电源插头。
加水时，以及将水箱放回时，水箱上下位置相反。
水箱
按下挂钩，取出水箱。
水箱
挂钩
请确认防霉组件安装
是否正确(第
19
页)。
防霉组件
拧开水箱盖。
