background image

13

YWP33N

nanoe

TM

 bacteriostasis and deodorization

The nanoe

TM

 is generated from indoor air which 

may fail to run successfully due to various 

temperature and humidity conditions.

Generation conditions

Indoor temperature: 5°C~35°C with dew 

                                 temperature above 2°C.

Relative humidity: 30%~85%

Environment conditions for generation

Little amount of ozone

Press to

select

nanoe

TM

 (Laundry/Mode/Humidity)

To clean and deodorize during 

operation

During "Laundry"

To refresh cloths, with deodorization and sterilization nanoe

TM

 

function will be enabled automatically, The LED indicator lights 

up and cannot be cleared manually. The system beeps if you 

try to operate the "Purifying" button.

If sound set OFF, there is no beep.

In "Mode" and "Humidity"

The nanoe

TM

 function may be switched on/off as desired.

About nanoe

TM

The generation of nanoe

TM

 ion may be 

accompanied with little amount of ozone. It's far 

less than ozone level existing in natural forest 

and bears virtually no impact on human body.

In case of odor of ozone, disable the "cleaning 

and deodorization" function.

nanoe

TM

nanoe

TM

 nano water ion (nanoe

TM

 ion hereafter) is a charged clean water ion by separating water 

molecules with high voltage. The nanoe

TM

 ion technology features sterilization

★※

1

, allergens inhibition

2

fungi elimination

3

 and deodorization

4

 for skin healthy space.

    Floating fungi: Results after 4 hours test in 25 cubic meter closed space instead of practical outcome in 

    daily life environment.

    Adhering fungi: Results after 8 hours test in 23 cubic meter closed space instead of practical outcome 

    in daily life environment.

Deodorization effects vary with ambient environment (temperature, humidity), operation hours, 

deodorization, type of fabrics.
Standalone test and practical use effectiveness may differ from each other due to conditions and use 

method.

This device is not a medical equipment.

1

Floating fungi

           Experimental organization: Foundation 

           Kitasato Environmental Science Center

           Experimental methods: Placed in test room of 

           25 cubic meter and count bacteria collected

           Sterilization method: Releasing nano water ion

           Subjects: Floating fungi

           Results: More than 99% floating fungi killed 

           after 4 hours "BSHF 24_0301_1"

   〈

Adhering fungi

           Experimental organization: The Japan Food 

           Research Laboratories

           Experimental methods: Count bacteria adhere 

           to standard cloths in 23 cubic meter room

           Sterilization method: Releasing nano water ion

           Subjects: Bacteria adhere to standard cloths

           Results: More than 99.9% bacteria adhere to 

           standard cloths killed after 8 hours 

           "No. 13044083003-01"

2     Experimental organization: Panasonic 

           Corporation Analysis Center

           Experimental methods: Placed in test room of 

           23 cubic meter and test by ELISA method

           Removal method: Releasing nano water ion

           Subjects: Pollen (cedar)

           Results: More than 88% allergic substance 

           inhibited in 8 hours "BAA33-130402-F01"

3     Experimental organization: The Japan Food 

           Research Laboratories

           Experimental methods: Measuring changes in 

           fungi in test room of 23 cubic meter

           Sterilization method: Releasing nano water ion

           Subjects: Planktonic fungi

           Results: Positive effects in 8 hours 

           "No. 13044083002-01"

4     Experimental organization: Panasonic 

           Corporation Analysis Center

           Experimental methods: Verify with 6-grade odor 

           intensity table in test room of 23 cubic meter

           Deodorization method: Releasing nano water 

           ion

           Subjects: Adhering cigarette odor

           Results: Odor intensity dropped to grade 1.2 in 

           2 hours "BAA33-130125-D01".

Note: nanoe

TM

 and the nanoe

TM

 mark are trademarks of Panasonic Corporation

Summary of Contents for F-YWP33N

























Reviews: