16
Float
Clean dirt around shaft
with water (to prevent
float from malfunctions)
Do not remove float
(invalid installation of it
may lead to operation
failure and water leak)
→ Insert both axis in
hole as illustrated in
figure to the left when
float falls off.
To remove the tank cover
Turn water tank handle up
Open the water outlet
Pull water tank cover
upward
Do not strongly pull on
the water outlet.
Maintenance
Polish
Thinner
Alcohol
and benzine
Air conditioner
cleaner
Alkaline
detergent
Bleach
Empty the water
tank before doing
any maintenance
work!
Please disconnect the power plug and empty the
tank. (see P.14 for how to empty the tank)
Cleaning agents such as those shown at under should
not be used.
If using a chemically-treated cloth, be sure to read
the instructions of the cloth.
Water tank: Once per month
Tank removal bar
Water tank
Water outlet
Tank handle
Tank cover
(turn tank handle
upward before removing
or replacing it)
Wash water tank and tank cover with clean water 2-3 times.
You don't need to remove the float, just clean it with water.
Float
Pore
Shaft
Tank handle
Water outlet
Tank
cover
Remove sticky dirt with thinned
neutral detergent
Inner wall of tank may get black
(due to dirt in air which dissolved
in water)
Summary of Contents for F-YWP33N
Page 22: ...Memo 22 ...
Page 23: ...Memo 23 YWP33N ...