Panasonic Factory Line 20 Instruction Manual Download

Page: 12 / 12

Poster clip

Duct

Mounting a duct cover

・

Mount the cover by fitting it into the opening in the duct.

Use of a poster clip

●

The maximum load weight is 1 kg.

Not doing so may cause the hangers to drop.

●

Notes the installation place.

When is to be near the illuminator,The poster might discolor
and begins to burn because of the heat of the illuminator.

Caution

Duct

Opening

Duct cover

・

Use the poster clip to suspend a work instruction sheet or

process chart from the Factory Line 20.

・

Fold down about 10 mm of the top of the work instruction

sheet or process chart and slide it sideways into the poster

clip.

・

The work instruction sheet can be positioned in the desired

direction.

・

Mount the poster clip onto the Factory Line 20 duct in the

same way as a plug.

Summary of Contents for Factory Line 20













Search results

Summary of Contents for Factory Line 20

Reviews:

Related manuals for Factory Line 20

Brands by name

Popular brands

Panasonic Factory Line 20, Instruction Manual

Search results

Summary of Contents for Factory Line 20

Reviews:

Related manuals for Factory Line 20

Brands by name

Popular brands