Technical/Programming Manual
FT1020G3 Rev 2.2.1
41
properties dialog box with its logical expression (similar to programmable relay
output).
5. Add input
0 and input 1 to program the Bulgin keys. Select type “NZ Silence switch”
for input 0 and assign the name
to “Silence Alarms”. Select type “Evacuate” for
input 1 and assign the name
to “Evacuate”.
A typical NZ mimic application is shown in Figure 16 below.
Figure 16 Generic application, NZ Index panel
6.4
Occupant Warning System (OWS)
6.4.1
Overview
Brooks OWS is an intelligent occupant warning system that can be incorporated in
FT1020G3 with number of options depending on the available space in the cabinet, larger
enclosures can be used to allow for more options.
Figure 17 Occupant Warning Display Module
Or 24VDC from
external source
EBL512
COM Loop
24VDC
Mimic board
SUB927
I/O Matrix Board
4582
