3-38
(Rear side)
2)
Removal of the ozone filter 1, 2, 4 and 5
(1)Remove the rear cover. (4 screws)
(2)Remove the ozone filter 2.
4
(Left side)
(1)Open the front door.
(2)Open the exit door.
(3)Remove the filter holder (2 screw).
(4)Remove the ozone filter 1and 4.
(Ozone filter 4 : FP-D250/D350/D350H)
Ozone filters
5
Only FP-D450/D600
(1)Perform the procedures of the fuser unit
removal and remove the fuser unit.
a) Open the toner hopper unit.
b) Remove the pin.
c) Remove the manual paper feed knob.
d) Remove the inner cover 2.
e) Remove the fuser unit.
(2)Remove the ozone filter 4 and 5.
6
2
Pin
Toner hopper unit
Manual paper feed knob
Inner
cover 2
Ozone filter 5
Ozone filter 4
Ozone duct 2
