5-6
c10
c11
c12
c13
c14
c15
c16
a) System console detecting
sensor
b) System console paper level
sensor 3 (lower tray)
c) System console paper level
sensor 2 (middle tray)
d) System console paper level
sensor 1 (upper tray)
a) LCC paper limit sensor
b) LCC paper detecting sensor
1
c) LCC paper tray lower limit
sensor
d) LCC detecting sensor
e) LCC door open / close sensor
f) LCC detecting sensor 2
g) LCC paper level sensor
a) Discharge lamp error signal 1
b) Discharge lamp error signal 2
(FP-D450/D600)
Not used
a) Shift tray home position
sensor
b) Shift tray detecting sensor 2
c) Inverting registration sensor
paper detecting signal
d) Shift tray door open / close
sensor
e) Shift tray paper exit sensor
f) Shift tray detecting sensor 1
a) 2 bin finisher paper exit sensor
(inverting exit)
b) 2 bin finisher paper pass sensor
c) 2 bin finisher paper exit sensor
(straight exit)
d) 2 bin finisher paper feed sensor
a) 2 bin finisher dust box detecting
sensor
b) 2 bin finisher belt home position
sensor
c) 2 bin finisher jogging home
position sensor
d) 2 bin finisher set switch
System console is detected.
Paper is empty or tray is
pulled out.
Paper is empty or tray is
pulled out.
Paper is empty or tray is
pulled out.
Paper tray is beyond the
upper limit.
Paper is detected.
Paper tray is beyond the
lower limit.
LCC is pulled out.
Door is closed.
LCC is installed.
Paper is detected.
Lamp is lit.
S h i f t t r a y n o t i n h o m e
position.
Shift tray is installed.
Paper is detected.
Door is closed.
Paper is detected.
Shift tray is installed.
Paper is detected.
Paper is detected.
Paper is detected.
Paper is detected.
Dust box is not detected.
Bin in home position.
Jogging in home position.
2 bin finisher is pulled out.
7 6 5 4 3 2 1 0
Message display
Code
No.
Function
Condition
