1.
Connect the AC adaptor (included with the unit or sold separately) to the DC input jack of the cradle.
•
Connect the AC cord (included with the unit or sold separately) to the AC adaptor, and connect the
plug of the AC cord to an AC outlet. Refer to the Operating Instructions - Read Me First included
with the unit for safety precautions for the AC adaptor and AC cord.
2.
Insert the unit from above the cradle and push the upper center of the unit all the way in.
•
Make sure there are no foreign objects between the unit and the cradle. This may cause malfunctions
in the unit and the cradle.
A
3.
To lock the lock release lever, connect the cable for security to the security lock at the side (A).
IMPORTANT
•
Do not move the cradle while the unit is connected.
•
If the unit malfunctions while connected to the cradle, disconnect the unit and check to see if the unit
operates normally. If the unit operates normally, the cradle may be malfunctioning. Contact your
technical support representative.
Disconnecting the unit
•
If the cable is connected to the security lock at the side, remove the cable.
50
Operating Instructions - Reference Manual
Supplementary items
