background image

About tablet

Allows you to confirm information about the tablet.

Power options menu

You can press and hold 

 (power button) to display the power options menu. From here, you can perform

or set the following commonly-used features.

Power off

Restart

Touch operation mode (page 37)

Lockdown

[UserButtonManager] app

You can customize the unit’s function buttons. Some of the available functions that you can assign to the
buttons are listed below.

Back (the same function as 

)

Home (the same function as 

)

Menu

Barcode reader trigger

Flashlight

Launch an app of your choosing

Capture a screenshot

Security mode (turns off the screen and sound)

Display the screen when it is turned off

Changing the functions assigned to the buttons

1.

Swipe up the home screen, and then in the app list, tap 

[UserButtonManager]

.

2.

Tap 

 next to the item you want to change, and then select the desired function.

Default button assignments

The default button assignments are explained below.

Short press assignments

A1

Returns to the previous screen or closes the current screen, menu, on-screen keyboard, etc. (The
same function as 

.)

A2

Displays the home screen. (The same function as 

.)

A3

Displays the list of options (if available) for the current screen.

A1+A2

Allows you to select the active SIM card slot.

A2+A3

Captures a screenshot.

Operating Instructions - Reference Manual

35

Settings

Summary of Contents for FZ-A3 Series



















































































Reviews: