Cradle
You can use an optional cradle. This device frees you from being bothered by a lot of cable connections when you carry the computer. It also allows you to
connect various peripherals.
Connect the cradle to the expansion bus connector (A) on the bottom side of the computer.
For further information, refer to the instruction manual of the cradle.
In combination of the computer and Cradle, you can connect variety of devices.
Read operating instructions for each device carefully when connecting each device to the Cradle.
Connecting/Disconnecting the Computer
N O T E
n
This manual is shared between FZ-VEBM11 series and FZ-VEBM12 series. Illustrations of FZ-VEBM12 series are used. For parts provided
only for a specific model, the model number is shown.
Names and Functions of Parts
C A U TI O N
n
Do not touch the expansion bus connector or pins of the Cradle.
<Rear>
A.
USB 3.0 ports (2 ports)
B.
LAN Port
C.
HDMI Port <Only for FZ-VEBM12 series>
Connector for HDMI compatible digital display.
It is not compatible with the analog display.
The display specifications of the maximum resolution, etc. that can be output differ according to the specifications of the device con-
nected. For details, refer to the specifications of the device connected.
D.
VGA Port <Only for FZ-VEBM12 series>
E.
Serial Port <Only for FZ-VEBM12 series>
It does not support serial mouse.
F.
Security Slot (Rear)
A Kensington cable can be connected.
For more information, read the manual that comes with the cable.
<Front>
-
97
-
