56
Useful Information
Installing Software
Using Recovery Disc
Use the Recovery Disc in the following conditions.
y
You have forgotten the administrator password.
y
Installation is not complete. The recovery partition in the flash memory may be
broken.
Preparation
l
Prepare the following items:
y
Recovery Disc (
Reference Manual
“Recovery Disc Creation
Utility”)
y
USB DVD drive (optional) (refer to recent catalogs and other sources
for information about the products available)
l
Remove all peripherals (except for the USB DVD drive).
l
Connect the AC adaptor and do not remove it until installation is com-
plete.
1
Connect the DVD drive to the USB port.
2
Start the Setup Utility.
Display “Charm”, and touch - [Change PC settings] - [Update and
recovery] - [Recovery].
Touch [Restart now] under “Advanced startup”.
Touch [Troubleshoot] - [Advanced options] - [UEFI Firmware Settings] -
[Restart].
l
If the [Panasonic] boot screen is not displayed, turn on the computer
while touching top left of the screen.
l
If the password is requested, enter the Supervisor Password.
3
Write down all of the contents of the Setup Utility and
touch [Exit] and double-touch [Load Default Values].
At the confirmation message, touch [Yes].
4
Set the Recovery Disc into the DVD drive.
5
Touch [Exit] and double-touch [Save Values and Reboot].
At the confirmation message, touch [Yes].
Computer will restart.
6
Touch top left of the screen while [Panasonic] boot screen
is displayed.
The Setup Utility starts up.
l
If the password is requested, enter the Supervisor Password.
7
Touch [Exit] and double-touch your DVD drive in [Boot
Override].
The computer will restart.