Troubleshooting
If you experience any trouble while using this product, refer to the following
information for basic troubleshooting. If the trouble persists, contact your technical
support representative.
The battery does not
charge.
R
The battery is not properly inserted. Make sure it is
inserted properly.
R
The AC adaptor is not properly connected. Confirm
the connection.
R
The terminals are dirty. Clean the terminals.
R
The ambient temperature is too low or too high.
Charge the battery in environments with an ambient
temperature of 10 °C to 35 °C (50 °F to 95 °F).
Charging ends
quickly or does not
occur at all.
R
The battery may be worn out. Replace the battery
with a new one.
The indicator does
not light.
R
The battery is not properly inserted. Make sure it is
inserted properly.
R
The AC adaptor is not properly connected. Confirm
the connection.
R
The battery charging terminals are dirty. Clean the
terminals.
R
The battery may be worn out. Replace the battery
with a new one.
The indicator flashes
in red.
R
The battery is not properly inserted. Make sure it is
inserted properly.
R
The battery charging terminals are dirty. Clean the
terminals.
R
Charging did not end properly or too much voltage
was detected. Remove and reinsert the battery or
the AC adaptor plug.
R
Battery authentication failed because an
unsupported battery was installed. Use only
specified batteries.
R
The battery may be worn out. Replace the battery
with a new one.
The indicator flashes
in orange.
R
The ambient temperature is too low or too high.
Charge the battery in environments with an ambient
temperature of 10 °C to 35 °C (50 °F to 95 °F).
13
Summary of Contents for FZ-VCBN131
Page 46: ......