37
5.1.8.
ID/Password Change
Select "Basic Config" and "System Security" and then "ID/Password Change" to
open the screen shown in Figure 5-8. On this screen, you can configure the user
name/password.
Figure 5-8 ID/Password Change
Screen Description
Note:
Do not forget your user name and password.
These will be required to login to this switch.
Current User ID
Enter the current user name.
This is used to login to this switch. "manager" is the factory default setting.
Current Password
Enter the current password.
This is used to login to this switch. "manager" is the factory default setting.
New User ID
Enter the new user name.
New Password
Enter the new password.
New Password
(Confirm)
Enter the password again to make sure the correct password is entered.
