19
5. Switch Configuration
After completing configuration, you must save the configuration information in
accordance with Section 5.3.3. Unless you save the configuration information, the
settings configured so far will not be reflected upon restart.
5.1.
Basic Config
5.1.1. Administration Config
Select "Basic Config" and then "Administration Config" to open the screen shown
in Figure 5-1. Select this screen to display this switch's information. On this screen,
you can set administrative information, such as device name.
Figure 5-1 Administration Configuration
Screen Description
Product Name
Displays the system information. This item is not editable.
Host Name
Displays the system name. The factory default setting is blank.
