Page 11 of 17
Model
Name
Model
No.
GA-M+
PN260496-TH
Product Specification
401-260496-TH-SP05
Date issued
Date revised
Jun. 29, 2021
Apr. 1,2022
Panasonic Electric Works Networks Co., Ltd.
7. Layer 2 Switching Functions
Access control can be controlled by the following parameters:
（1） IP address, IPv6 address （Source or Destination）
（2） MAC address （Source or Destination）
（3） TCP/UDP port number （Source or Destination）
（4） VLAN ID
（5） IEEE 802.3p Priority
（6） DSCP,DSDP6
（7） Protocol
（8） ICMP type
（9） TCP SYN Flag
7－14. Access control
7－16. Storm control function
Unknown unicast, Broadcast, Multicast of possible control the storm
7－13. Multicast
IGMP snooping（IGMPv1/v2/v3） function （can be up to 1,024 groups of registration）
IGMP Querier function
MLD snooping（MLDv2） function （can be up to 1,024 groups of registration）
Multicast filtering function
7－15. Time setting
SNTP settings, time manual setting
7－11. Silent fan control
The fan rpm can be set in accordance with the usage environments.
If the fan rpm are set, the available power supply will be automatically restricted.
If the fan rpm (Fan Speed) are set to Low1,or Min, the device’s overall available
power supply (Power Budget) will be automatically restricted, and it can be used with
the fan noise reduced.
7－12. Ring redundant protocol
Redundancy is enabled by ring configuration. (Up to 5 group can be registered.)
Fan Speed
Operating
environment
temperature
Maximum
Power Supply
(Power Budget)
Noise
Characteristics
(*)
Comments
LpA
High
0-50℃
240W
45dB
Factory
default
Low
(Low1)
180W
34 dB
(Low2)
0-40℃
240W
Min
180W
28 dB
(*) The noise characteristics measuring values in the surrounding area while in each
mode are in accordance with JIS X 7779, thus the performances of the average
values are not guaranteed.
7－10. PoE auto reboot function
Monitoring, and the switching of the power supply OFF/ON to ports is
possible via Ping, LLDP, and the 3 traffic volume methods.
7－9. PoE scheduler function
PoE power supply control can be scheduled.
The setting can be configured by the month, week, day or specific date.
The maximum number of schedules to be registered: 32
