Page 17 of 17
Model
Name
Model
No.
GA-M+
PN260496-TH
Product Specification
401-260496-TH-SP05
Date issued
Date revised
Jun. 29, 2021
Apr. 1,2022
Panasonic Electric Works Networks Co., Ltd.
14. Basic Instructions for the Use of This Product
(1) For inspection and/or
diagnosis,
consult the retailer.
(2) Use commercial power supply from a wall socket, which is close and easily accessible to this Ethernet Switch.
(3) Unplug the power cord when installing or moving this Ethernet Switch.
(4) Unplug the power cord when cleaning this Ethernet Switch.
(5) Use this Ethernet Switch within the specifications. Deviation could lead to malfunction.
(6) Do not touch the twisted pair cable modular metal terminals which are connected to RJ45 connectors (twisted pair ports)
or the connectors, nor place them near electrically-charged objects. Static electricity could lead to equipment failure.
(7) Do not put the modular plug of the connected twisted pair cable on objects that can carry static charge, such as carpet.
Do not place it in the proximity. Static electricity could lead to equipment failure.
(8) Do not put a strong shock, including dropping, to this Ethernet Switch.
Deviation could lead to equipment failure.
(9) Before connecting a console cable to the console port, discharge static electricity, for example by touching metal appliance
(do not discharge by touching this Ethernet Switch).
(10) Please use this Ethernet Switch in place where ambient temperature is from 0 to 50℃.
In use of this Ethernet Switch where the FAN control is set to Low2 or Min, please store and/or use this Ethernet Switch in
place where the ambient temperature is 0 to 40 Celsius degree.
And, do not store and/or use this Ethernet Switch in the environment with the characteristics listed below.
(Store and/or use this Ethernet Switch in the environment in accordance with the specification.)
- High humidity. Possible spilled liquid (water).
- Dusty. Possible static charge (such as carpet).
- Under direct sunlight.
- Possible condensation. High/low temperature exceeding the specifications environment.
Failure to satisfy the conditions above may result in a fire, electric shock, equipment failure, and/or malfunction.
Such events are not covered by the warranty.
(*) If it is used beyond the operating environmental temperatures, then the protective devices will start working and
the Ethernet Switch power will be shut off.
(11) Do not block the ventilator of the Ethernet Switch.
Blocked ventilator induces the heat accumulation inside, causing equipment failure and/or malfunction.
(12) Operation is not guaranteed if a module other than the optional SFP extension modules (PN54022-TH/PN54024-TH) is
inserted into the SFP extension slot.
For the latest information about compatible SFP extension modules, check our website.
(13) When using two Ethernet Switches, do not stack them. When you place them side by side, allow for a space of 20 mm or
more between them. This space is not necessary if you use supplied connection brackets.
(14) When Ethernet Switches mounting to rack, leave a minimum of 20mm space between them.