background image

Page 2 of  17

Model
Name

Model
No.

GA-M+

PN260496-TH

Product Specification

401-260496-TH-SP05

Date issued

Date revised

Jun. 29, 2021

Apr. 1,2022

Panasonic Electric Works Networks Co., Ltd.

3-1. Power supply

AC100-240V, 50/60Hz, 5.0A (with a built-in power supply)

3-2. Power consumption

3-3. Operating environment

Temperature: 0 - 50℃
Humidity:      20 - 80%RH (no condensation)

(Please note) Please note that if the aforementioned conditions are not satisfied, then 
that may cause fire, electrical shock, malfunctions or misoperations, which are not 
covered by the warranty.
*If it is used beyond the operating environmental temperatures, then the protective 
devices will start working and the Ethernet Switch power will be shut off.
*If the settings for the silent fan control functions are changed, then the upper limit for 
the operating environmental temperatures may change.
For details, check “7-11. The Silent Fan Control Functions”.

3-4. Storage environment

Temperature: -20 - 70℃
Humidity:      10 - 90%RH (no condensation)

Normally, Max.291W (15.7W when not supplying power), Min. 11.5W

3. Rated/Environmental Conditions

4-1. Form and materials/colors

4-2. Mass(Weight)

2,300g

4. Form

Dimensions

:44mm(Height)×210mm(Width)×260mm(Depth)
(Excluding protruding sections)

Case material

:SECC

Color

: Main unit: Green 03, Front face: Black 03, 

Face plate label: Black 04

3-5. EMC compliance

CISPR 32 Class A
EN 55032 Class A
AS/NZS CISPR32 Class A
VCCI Class A
EN 61000-3-2, EN 61000-3-3
EN 55024
IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, 
IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11 

* Electrical surges (lightning-induced surges in wiring): 10 kV

(Depending upon the twisted pair ports, and Panasonic’s proprietary evaluations)

3-6. Safety compliance

IEC 62368-1 
EN 62368-1

RoHS compliant

3-7. Environment compliance

Summary of Contents for GA-ML4TWPoE++


















Reviews: