Page 7 of 17
Model
Name
Model
No.
GA-M+
PN260496-TH
Product Specification
401-260496-TH-SP05
Date issued
Date revised
Jun. 29, 2021
Apr. 1,2022
Panasonic Electric Works Networks Co., Ltd.
5. Hardware Specifications
LED（Left）
LED（Right）
Port 1-6 corresponding to the Auto MDI / MDI-X
(Allowed change by the setting for the application)
Ports 1-4 are set to "Disable" at factory default setting.
5－5. Cascade connections
5－4. LED display
5－6. FAN
installed
PoE are being supplied power.
Single port overload.
Also, an overload of the Ethernet Switch
occurs, and the ports are displayed which
cannot be supplied power.
Power is not being supplied, or the PoE
receiving equipment are not connected.
also, it is set in the ECO mode.
Table 1
Display mode
Behavior
Description
STATUS/ECO
GIGA
FULL
LOOP
HISTORY
Link is established.
Transmitting and receiving data.
It is shut off via the loop detection and shut
off function/storm control or the BPDU guard
It is sending and receiving just the
control packet.
No device connected or the ECO mode is set.
Link is established at 1000 Mbps.
Link is established at 100 Mbps or 10 Mbps,
or no device is connected.
Link is established at full-duplex
Link is established at half-duplex or no device
is connected.
Loop has been detected within the
last 3 days.
No loop detection history.
Port
LED
Left
Right
Green Light
Green Blink
Orange Light
Orange Blink
Off
Green Light
Off
Green Light
Off
Green Light
Off
Green Light
Orange Blink
Off
