Page 8 of 17
Model
Name
Model
No.
GA-M+
PN260496-TH
Product Specification
401-260496-TH-SP05
Date issued
Date revised
Jun. 29, 2021
Apr. 1,2022
Panasonic Electric Works Networks Co., Ltd.
RFC1213-MIB（MIBⅡ）
（RFC 1213) （*1）
BRIDGE-MIB
（RFC 4188) （*2）
SNMPv2-MIB
（RFC 1907）
RMON-MIB
（RFC 2819） only etherStatsTable
SNMP-FRAMEWORK-MIB
（RFC 2571）
SNMP-MPD-MIB
（RFC 2572）
SNMP-NOTIFICATION-MIB
（RFC 2573N）
SNMP-TARGET-MIB
（RFC 2573T）
SNMP-USER-BASED-SM-MIB
（RFC 2574）
SNMP-VIEW-BASED-ACM-MIB
（RFC 2575）
SNMP-COMMUNITY-MIB
（RFC 2576）
IP-MIB
（RFC 4293） (*3）
IF-MIB
（RFC 2863） excluding IfMIB
IEEE8021-PAE-MIB
excluding dot1xPaeSupplicant
POWER-ETHERNET-MIB
(RFC 3621) (*4)
*1 Excluding following items
At , ipRouteTable, icmp, egp
*2 Excluding following items
dot1dStp, dot1dSr, dot1dStatic
*3 Excluding following items
ipDefaultRouterTable, ipv6RouterAdvertTable
*4 Excluding following items
deelxSoppConfigTable, dotlxSuppStatusTable
6－5. Supported MIB
6. Software Specifications
6－6. System log
Maximum number to be kept: 10,000
Transfers system logs to the Syslog server (IPv4/IPv6)
Control parameters can be set by the following procedures:
(1) Configuration from an asynchronous terminal connected to the console port.
(2) Configuration from a remote terminal connected via TELNET and SSH.
(3） It can be set from a remote terminal according to the Web screen.
Management protocol ：SNMP v1/v2c /v3 （RFC 1157, RFC 1901, RFC 3411,
RFC 3412, RFC 3413, RFC 3414,
RFC 3415, RFC 3416)
TELNET
（RFC 854, RFC 855)
SSH v2 （RFC 4252, RFC 4253, RFC 4254,
RFC 4716, RFC4419）
Data transfer protocol ：TFTP
（RFC 783, RFC 1350）
ZEQUO assist Plus can confirm the management/operation status of Ethernet Switch.
Ethernet Switch can be controlled by the following procedures:
(1) Control from an asynchronous terminal connected to the console port.
(2) Control from a remote terminal using SSH/TELNET and TCP/IP network
connection
(3) Control using SNMP Manager
The Ethernet Switcho peration status can be checked using the following functions.
(1) Internal temperature sensor function
(2) Function to display the CPU usage and memory usage
(3) SFP module status checking function (DDM: Digital Diagnostic Monitoring)
6－3. Rebooting
6－2. Ethernet Switch Control
6－4. Supported Agent
The system can be reset from the software in the following three modes:
(1)
Warm start.
(2)
Reset back to the factory default settings.
6－1. Configuration
