Useful Information
77
For product assistance, visit www.globarange.com
For
A
assistance, visit www.joip.com
Registering a handset
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base
unit, register the handset.
Important:
L
If you have already deregistered the
handset, perform steps 2 and 3 only.
1
Handset:
K
i
{#}{
1
}{
3
}{
0
}
2
Base unit:
BB-GT1500
Press and hold
{x}
until the
4
indicator flashes in red.
BB-GT1520/BB-GT1522/BB-
GT1540
Press and hold
{x}
until the
registration tone sounds and the
4
indicator flashes in red.
L
If all registered handsets start
ringing, stop ringing by pressing
the same button. Then repeat this
step.
L
After the
4
indicator starts
flashing in red, the rest of the
procedure must be completed
within 90 seconds.
3
Handset:
[
4
Wait until
“
Enter Base PIN
”
is
displayed, then enter the base unit
PIN (default:
“
0000
”
), then press
M
.
L
If you forget your PIN, see page
91.
L
When the handset has been
registered successfully,
_
will
change to
w
. If the keytone is
turned on (page 52), a
confirmation tone will be heard.
Registering an additional handset
See page 9 for information on the
available model. Start from step 2.
Deregistering a handset
1
K
i
{#}{
1
}{
3
}{
1
}
2
{
3
}{
3
}{
5
}
i
M
3
{V}
/
{^}
: Select the handset you
want to cancel.
i
M
4
{V}
/
{^}
:
“
Yes
”
i
M
L
When you cancel a different
handset than the one you are now
using, press
{i}
to exit.
BB-GT1540
1
Press and hold
{x}
until the
registration tone sounds, and the
4
indicator flashes in red.
2
Press and hold the handset number
(
{
1
}
-
{
6
}
) that you want to cancel
until a confirmation tone sounds.
Handset
Base unit
GT15xxE.book Page 77 Wednesday, August 1, 2007 11:59 AM
