Panasonic GP-MF622E, Operating Instruction

- 12 -

Pick-up Device :

Inter Line Transfer type CCD with 752 (H) x 582 (V) pixels.

Image Size :

1/2” (7.95 (H) x 6.45 (V) mm)
2 : 1 interlace 1-line interlace (Frame accumulation)
2 : 1 interlace 2-line interlace (Field accumulation)

Synchronization :

Internal or External (Selectable Automatically)
Internal : Built-in sync generator
External : 4.0 V[p-p]/75 

Ω

Horizontal drive and Vertical drive pulses

for 2 : 1 interlace

External Reset :

External signal (4.0 V[p-p]/75 

Ω

, negative) supplied to EXT VD IN con-

nector can be used as reset signal

Horizontal Resolution : 

560 lines at center

Minimum Illumination : 

1.0 lx (0.1 foot-candles), (F1.4, Manual Gain Max (+6 dB), 

γ

OFF, 2 : 1

interlace, without shutter)

Signal to Noise Ratio:

54 dB Typical (Manual Gain OFF (0 dB),  

γ

OFF, 2:1 interlace without

shutter)

Gamma :

1.0

Gain Selection :

0 - 6 dB (Adjustable by Manual Gain Control on rear panel)

Electronic Shutter :

10-step (1/120s to 1/96 000 s) at normal
7-step (1/2 000s to 1/96 000 s) at Shutter Trigger Mode B.
4-step (1/2 000s to1/30 000 s) at Shutter Trigger Mode C.

Lens Mount :

C-Mount

SPECIFICATIONS