22
o
Scene file setting [SCENE FILE]
Registration of details, gamma, hue, etc. as a scene file in accordance with an installation location allows users to employ the
registered contents only by pressing the [SCENE] button on the front face of the CCU.
Up to 3 scene files can be registered.
Scene file registration is performed on the “SCENE FILE” screen. Move the cursor to “SCENE FILE” on the top screen of the
SETUP menu and select a scene file by pressing the [
e
] or [
f
] button. Then, press the [SEL] button to display the “SCENE
FILE” screen. The “SCENE FILE” screen consists of 2 pages of contents. The selected scene file number appears beside the
screen title.
The characters specified at “FILE LABEL” are displayed at “LABEL”. The default is blank.
[DTL MODE] Specifies the details
The band and level of the edge correction are specified.
“SCENE FILE” screen
“DTL MODE” screen
** SCENE FILE 1 ** P1
LABEL:................
DTL MODE *MANU
RED DTL OFF
GAMMA ....
|
.... 45
KNEE *MANU
BLACK STRETCH OFF
D-RANGE NORMAL
WHITE CLIP ........
|
109
RET END
** SCENE FILE 1 ** P2
LABEL:................
FLARE COMP OFF
DNR LOW
MATRIX *USER
CHROMA GAIN .....
|
...160
TOTAL PED ....
|
.... 76
FILE LABEL *OFF
AWC MEMORY 1
RET END
** SCENE FILE 1 ** P1
LABEL:................
DTL MODE *MANU
RED DTL OFF
GAMMA ....
|
.... 45
KNEE *MANU
BLACK STRETCH OFF
D-RANGE NORMAL
WHITE CLIP ........
|
109
RET END
** DTL MODE **
PATTERN USER
DTL BAND . . . .
|
4
−
+
DTL LEVEL ....
|
.... 16
−
+
RET END
Step 1
Move the cursor to “DTL MODE” of the “SCENE FILE”
screen and press the [SEL] button.
The “DTL MODE” screen appears.
→
Step 2
Move the cursor to “PATTERN”, select a pattern from
among “1”, “2” and “3” and press the [SEL] button.
The setting contents of “DTL BAND” and “DTL LEVEL”
→
are applied to “USER”.
The band and level can be manually adjusted in “USER”.
Perform adjustment on an as needed basis.
Be sure to view a monitor when the adjustment is per-
formed.
Note:
The band and level can also be adjusted directly without
•
applying any of the patterns, “1”, “2” and “3” to “USER”.
Step 3
Move the cursor to “DTL BAND” and use the [
e
] or [
f
]
button to select the band of the edge enhancement.
When the level indicator moves in the “+” direction, the edge
becomes thinner (the band becomes higher). When the level
indicator moves in the “–” direction, the edge becomes
thicker (the band becomes lower).
Step 4
Move the cursor to “DTL LEVEL” and use the [
e
] or [
f
]
button to select the level of the edge enhancement.
When the level indicator moves in the “+” direction, the
image becomes sharper, and when the level indicator
moves in the “–” direction, the image becomes softer.
Note:
Jaggies may appear on the edge of a photographic
•
subject, but this phenomenon is not abnormal. If this
phenomenon is not favorable, decrease “DTL BAND” or
“DTL LEVEL” to adjust the image quality.
Scene file number
[RED DTL] Adjusts the enhancement of red edge
The red edge enhancement level of images through the camera is adjusted.
The level is selectable from the following:
OFF (default):
No edge enhancement is performed on the red portion.
LOW:
The low level of edge enhancement is performed on the red portion.
HIGH:
The high level of edge enhancement is performed on the red portion.
