background image

4

Contents

Safety precautions  ........................................................... 2

Before use  ......................................................................... 5

Overview  ........................................................................ 5
Concerning HD Visual Communications System  ........... 5
Concerning the Operating Instructions  .......................... 5
Trademarks and registered trademarks  ......................... 5
About copyright and licence  ........................................... 5
Disclaimer of warranty .................................................... 5

Characteristics  .................................................................. 6

Accessories  ...................................................................... 7

Installation precautions  ................................................... 8

Operating precautions  ................................................... 10

Concerning the IR repeater function  ............................ 12

Parts and their functions  ............................................... 13

Installation  ....................................................................... 14

When installing the unit on a desk  ............................... 14
When mounting the unit on a tripod  ............................. 14

How the model’s Operating Instructions manuals are configured

p

p

Before installing the unit, be sure to read this document to ensure that the unit is installed correctly.

p

p

This manual explains how to install the unit.
For details on how to operate the unit and select its settings, refer to the operating instructions of the HD Visual 
Communication Unit to be connected.
To read PDF files, you will need Adobe

®

 Reader

®

 which is available from Adobe Systems.

Connections  .................................................................... 15

Connections to the HD Visual Communication Unit  
and AC adapter  ............................................................ 15
Connecting the IR system cable (sold separately)  ....... 15
Installation precautions for the IR system cable  ........... 16
Checking the operations performed when the  
IR system cable is installed  .......................................... 16

How to turn the power on and off  ................................. 17

Turning the power on  ................................................... 17
Turning the power off  ................................................... 17
Concerning the mode transitions  ................................. 17

Factory setting  ................................................................ 18

Factory settings for the setting items  ........................... 18

Troubleshooting  .............................................................. 19

Appearance  ..................................................................... 22

Specifications  ................................................................. 23

Summary of Contents for GP-VD130

























Reviews: