4
2 Service Navigation
2.1.
Introduction
This service manual contains technical information, which allow service personnel’s to understand and service this model
Please place orders using the parts list and not the drawing reference numbers.
If the circuit is changed or modified, the information will be followed by supplement service manual.
2.2.
Important Notice
2.2.1.
About LENS MAIN UNIT (Ref. 213)
1. LENS MAIN UNIT (Ref. 213) is not supplied due to difficulty of the transportation issue (Fragile, Dust-free packing), and
requires critical lens adjustments.
Therefore, any needs of the "LENS MAIN UNIT" (Ref. 213), carefully confirm its performance in advance.
2. Once "LENS MAIN UNIT" (Ref. 213) is confirmed as defective, place order "LENS Unit" (Ref. 200) and replace SHADING
FRAME (Ref. 203), to maintain Serial number of owner's original lens.
Fig. 1-1
3. No adjustment is required when replacing the part mentioned on Fig.1-1. But, when tighten the concerned screws,apply
proper torque mentioned on "4. Disassembly and Assembly Instruction" section.
