- 48 -
∫
To emphasize the outline of images
Setting [EVF/LCD DETAIL] to [ON] helps you achieve focus easier by emphasizing the outlines of
an image displayed on the LCD monitor and viewfinder.
You can also adjust the emphasis level or change the frequency.
≥
You can also enable or disable this function with the applicable USER button. (
)
≥
These settings will not affect the images actually recorded.
Adjusting the level of [EVF/LCD DETAIL]
1
Select the menu.
2
Touch
/
to adjust settings.
≥
You can select a value between
s
3 and
r
3.
3
Touch [EXIT] to complete the setting.
Setting the peaking frequency of [EVF/LCD DETAIL]
Select the menu.
≥
[EVF/LCD DETAIL] is canceled in following cases:
j
When Focus Assist (peaking function) is used (
)
One Push AF
If you press the USER button to which <PUSH AF> is registered in Manual Focus Mode, the
camera performs high-speed focusing until the image is focused.
≥
This function is registered to the USER1 button by default.
≥
Switch to Manual Focus Mode. (
)
Press the USER button to which <PUSH AF> is registered or touch the applicable
USER button icon.
≥
Auto Focus will be activated and the camera will perform high-speed focusing until the image is
focused.
≥
The focus setting returns to Manual Focus Mode once the image is focused or a certain time has
elapsed.
≥
One Push AF does not work in following cases:
j
When Auto Focus is used
: [DISP SETUP]
#
[EVF/LCD DETAIL]
#
[ON]
: [DISP SETUP]
#
[EVF/LCD PEAK LEVEL]
: [DISP SETUP]
#
[EVF/LCD PEAK FREQ.]
#
[HIGH] or [LOW]
MENU
MENU
MENU
