- 61 -
Highlight Playback
[HC-V210]/[HC-V201]/[HC-V210M]
Part that was recognized as clearly recorded is extracted from multiple scenes, and it can be played
back in a short time with effects and music added.
≥
Highlight Playback cannot be performed for scenes in iFrame or MP4.
1
Select
using the cursor button,
then press the ENTER button.
2
(Only when you would like to change the
settings)
Select the desired item and press the ENTER button.
3
Select [START] and press the ENTER button.
≥
When the [SCENE SETUP] in step 2 is not changed, it will playback with the last recorded date.
4
Select the playback operation. (
l
29
)
≥
When the playback is finished or stopped, the screen to select [REPLAY], [SELECT AGAIN] or
[EXIT] is displayed. Select the desired item and press the ENTER button.
≥
Playing back of all the scenes returns if the unit is turned off or the mode is changed.
≥
Slow-motion Playback and Frame-by-frame Playback are not possible.
∫
Scene setting
1
(Only when Highlight Playback is started from [ALL AVCHD])
Select the type of recording method for the scene you wish to play back
using the cursor button and press the ENTER button.
2
Select [SELECT DATE] or [SELECT SCENES] and press the ENTER button.
[SCENE SETUP]:
Select the scene or date to be played back.
[PRIORITY SETUP]:
Select the target to give priority to play back. (
l
62
)
[PLAYBACK TIME]:
Select the time to play back. (
l
62
)
[EFFECT SETUP]:
Select the effect for playback. (
l
62
)
[MUSIC SELECT]:
Select the music to be played on playback. (
l
62
)
[1080/60p]/[1080/60i]
