- 101 -
∫
To dub using equipment with an SD card slot
You can dub by directly inserting an SD card.
∫
To dub using equipment with a USB terminal
You can dub by connecting a USB cable.
≥
Use the AC adaptor to free you from worrying about the battery running down.
≥
Turn on the unit.
A
USB cable (supplied)
B
Turn the side with the symbol up to connect the micro B end of the USB Cable to the USB
terminal of this unit.
≥
Insert the plugs as far as they will go.
1
Connect the unit to the Blu-ray disc recorder or high-definition (AVCHD)
compatible DVD recorder.
≥
The USB function selection screen will appear on the screen of the unit.
2
Touch [RECORDER] on the screen of this unit.
≥
When you select an option other than [RECORDER], reconnect the USB cable.
≥
When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn
the LCD monitor on.
3
Dubbing through operations on the Blu-ray disc recorder or high-definition
(AVCHD) compatible DVD recorder.
Dubbing in high-definition picture quality
About the screen indication of the unit
≥
When the unit is accessing the SD card, card access icon (
) appears on the unit screen
or the access lamp is on.
≥
Be careful not to disconnect the USB cable, AC adaptor or battery while the unit is accessing
the media, as this may result in the loss of recorded content.