- 34 -
Set the file number of the MP4/iFrame and still picture recorded next to 0001.
≥
Folder number is updated and file number will start from 0001. (
≥
To reset the folder number, format the SD card, and then perform [NUMBER RESET].
Please be aware that if a medium is formatted, then all the data recorded on the medium will be
erased and cannot be restored. Back up important data on a PC, DVD disc etc. (
)
* Displayed when connecting a USB HDD. (
)
≥
Media selection screen is not displayed when the USB HDD is not connected. Touch [YES].
≥
When formatting is complete, touch [EXIT] to exit the message screen.
≥
Perform a physical formatting of the SD card when the SD card is to be disposed/ transferred.
(
≥
Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to
vibrations or shock.
The used space and remaining recordable time of the SD card can be checked.
≥
The remaining recordable time in the currently set Recording Mode is displayed only in the
Motion Picture Recording Mode.
≥
Any remaining recordable time exceeding 99 hours and 59 minutes will be displayed as
“”.
≥
Touch [EXIT] to close the indication.
≥
The SD card requires some space to store information and manage system files, so the actual
usable space is slightly less than the indicated value. The usable SD card space is generally
calculated as 1 GB=1,000,000,000 bytes. The capacities of this unit, PCs and software are
expressed as 1 GB=1,024
k
1,024
k
1,024=1,073,741,824 bytes. Therefore, the indicated value of
the capacity appears to be smaller.
[NUMBER RESET]
: [SETUP]
#
[NUMBER RESET]
[FORMAT MEDIA]
: [SETUP]
#
[FORMAT MEDIA]
#
desired media
[SD CARD]/[HDD]
*
Use this unit to format media.
Do not format an SD card using any other equipment such as a PC. The card may not be
used on this unit.
[MEDIA STATUS]
: [SETUP]
#
[MEDIA STATUS]
MENU
MENU
MENU
