- 81 -
∫
Prioritised face framing
Prioritised face framing is displayed as orange frames. Focus and adjustment of brightness will be
performed against the prioritised face framing.
≥
The prioritised face frame is displayed only with Portrait Mode in Intelligent Auto Mode or
Intelligent Auto Plus Mode.
≥
The white frame is for face detection only.
≥
Focus will be set to prioritised face framing when the
button is pressed halfway when
recording still pictures. Prioritised face framing will turn to green when the focus is set.
≥
Faces are not detected in Stop Motion Animation Assist Mode. (
≥
/
Faces are not detected in HDR Movie Mode. (
)
This function displays the horizontal/vertical tilt of the unit with the electronic level.
∫
To correct the tilt
≥
The horizontal tilt display
A
and vertical tilt display
B
appear yellow when there is a tilt, and
appear green when there is almost no tilt.
≥
The maximum tilt display angles are approximately 45
o
in horizontal direction and 10
o
in vertical
direction.
≥
The electronic level does not affect the actual recorded images.
≥
The electronic level is not displayed when recording yourself or the LCD monitor is closed with
the screen facing outward.
≥
Even when the tilt is in the corrected state, an error of approximately 1
o
may occur.
≥
In the following cases, the electronic level may not be displayed correctly:
j
When moving this unit
j
When pointing this unit up or down at an angle closer to perpendicular
[LEVEL GAUGE]
: [RECORD SETUP]
#
[LEVEL GAUGE]
#
[ON]
(Horizontal direction)
(Vertical direction)
When correcting the leftward tilt
When correcting the downward tilt
W585
W585M
MENU
