- 135 -
4
Dubbing through operations on the Blu-ray disc recorder or high-definition
(AVCHD) compatible DVD recorder.
≥
/
Do not touch [CHANGE MEDIA] on the screen of the unit during dubbing.
≥
Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any
other USB cables.)
≥
When this unit is connected to a Panasonic Blu-ray disc recorder or a DVD recorder using a USB
cable while the unit is turned on, power is also supplied from the connected equipment to this
unit.
≥
For details on dubbing and playback methods, read the operating instructions of the Blu-ray disc
recorder or DVD recorder.
≥
When you connect the unit to a Blu-ray disc recorder, a dubbing operations screen may appear
on the television connected to the Blu-ray disc recorder. In this case as well, perform the
operations of Steps 1 to 4.
≥
You cannot switch the Recording Mode/Playback Mode by pressing the recording/playback
button on this unit while the Blu-ray disc recorder or DVD recorder is connected. Disconnect the
USB cable before performing either of these operations.
≥
If the battery runs down during dubbing, a message will appear. Operate the Blu-ray disc recorder
to cancel the dubbing.
≥
/
If you convert the recording format of the scenes recorded in 1080/50p to 1080/50i, you can dub
them to devices that do not support AVCHD Progressive. (
)
About the screen indication of the unit
≥
When the unit is accessing the SD card, card access icon (
) appears on the unit screen
or the access lamp is on.
≥
/
When the unit is accessing the built-in memory, built-in memory access icon (
) appears
on the unit screen or the access lamp is on.
≥
Be careful not to disconnect the USB cable, AC adaptor or battery while the unit is accessing
the media, as this may result in the loss of recorded content.
HC-W850M
HC-V750M
HC-W850M
HC-V750M
HC-W850M
HC-V750M
