31
(ENG) SQT0650
Using [Link to Cell] with a direct connection
≥
Set the NFC function of the smartphone to on.
1
Start up the smartphone application “Image App”.
2
Touch the smartphone on
of this unit.
≥
Touch the NFC touch area while the NFC mark is displayed on
the smartphone screen.
≥
If this is the first time the smartphone is connecting to this unit,
touch [YES] on the screen of this unit, and then touch the
smartphone on
of this unit again.
≥
If the unit is not recognized even when touching the
smartphone, change positions and try again.
≥
The connection cannot be established while this unit is
recording.
≥
When the connection is complete, images of this unit is displayed on the smartphone screen.
≥
This unit is turned on even if it touches the smartphone on
of this unit, where this unit is
turned off with a LCD monitor.
1
Press Wi-Fi button on this unit and touch [Wi-Fi Setup].
2
Touch [Direct Connection].
3
On the smartphone, select the SSID displayed on this unit from the Wi-Fi
setup menu.
4
Start up the smartphone application “Image App”.
≥
If this is the first time the smartphone is connecting to this unit, a message will be displayed on
the screen of this unit. Touch [YES].
≥
When the connection is complete, images of this unit is displayed on the smartphone screen.
≥
Transmission speed may decrease, or may not be usable depending on the environment it is used in.
≥
For details on how to set up a connection with [Direct Connection Password] set to [ON], refer to
the Owner’s Manual (PDF format).
Use NFC to set up a direct connection between this unit and the smartphone.
Setting up a direct connection between this unit and the smartphone
when [Direct Connection Password] is set to [OFF]
Simplified-HC-X970&X870&V770_PP-SQT0650_mst.book 31 ページ 2014年12月25日 木曜日 午後5時59分