13
(ENG) DVQX1193
Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used on other equipment, for the first
time on this unit, format the SD card. (
l
23) When the SD card is formatted, all of the recorded data
is deleted. Once the data is deleted, it cannot be restored.
Caution:
Check that the access lamp has gone off.
1
Open the SD card cover and insert (remove) the SD card into (from) the
card slot
B
.
≥
Face the label side
C
in the direction shown in the illustration and press it straight in as far as
it will go.
≥
Press the centre of the SD card and then pull it straight out.
2
Securely close the SD card cover.
≥
Securely close it until it clicks.
Access lamp
[ACCESS]
A
≥
When this unit is accessing
the SD card, the access
lamp lights up.
Simplified-HC-V785_GC&GW&GN-DVQX1193ZA_mst.book 13 ページ 2016年12月28日 水曜日 午前10時20分