- 107 -
This will reduce the wind noise coming into the built-in microphones while maintaining the realism.
≥
Switch to Manual Mode. (
≥
When [Strong] is set, you can check how effectively the wind noise is reduced with the icon
displayed on the screen. In descending order of the strength of the reduction effect,
/
/
/
is displayed.
≥
When [Normal] is set,
will be displayed on the screen.
≥
This function’s default setting is [Normal].
≥
When switching to Intelligent Auto Mode or Intelligent Auto Plus Mode, [Wind Noise Canceller] is
set to [Strong], and the setting cannot be changed.
≥
You may not see the full effect depending on the recording conditions.
≥
This cannot be set when you have connected an external microphone or audio device
*
.
* You can connect audio equipment when using the
series/
series.
Switch the audio setting for the MIC/LINE IN terminal to suit the input device that is connected.
[Wind Noise Canceller]
: [RECORD SETUP]
#
[Wind Noise Canceller]
#
desired setting
[Strong]:
When a strong wind is detected, this option effectively reduces the
wind noise by minimising the low-pitched sound.
[Normal]:
This option extracts and reduces only the wind noise without
deteriorating the sound quality.
[OFF]:
Cancel the setting.
series/
series
[AUDIO INPUT SELECT]
: [RECORD SETUP]
#
[AUDIO INPUT SELECT]
#
desired setting
[MIC INPUT]:
Select when you connect an external microphone.
[LINE INPUT]:
Select when you connect audio equipment, etc., compatible with line
input.
MENU
WXF1
VXF1
WXF1
VXF1
MENU
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 107 ページ 2018年2月22日 木曜日 午後12時30分