- 92 -
≥
When [REC FORMAT] is set to [AVCHD]
A
Favours image quality
B
Favours Recording time
≥
When [REC FORMAT] is set to [24p]
*1 [1080/50M]/[1080/28M] and [720] are recording modes suitable for playing back or editing on a
PC.
*2 [iFrame] is a format suitable for Mac (iMovie etc.). It is recommended for when using a Mac.
*3 You can record motion pictures in 1080/50p (1920
k
1080/50 progressive), the best AVCHD
picture quality for this unit.
≥
Please refer to page
for details about recordable time using the battery.
≥
Use an SD card conforming to Class 10 of the SD Speed Class Rating when you want to
record motion pictures to the SD card using the setting [1080/50M].
≥
for details about approximate recordable time.
≥
When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded,
mosaic-type noise may appear at playback.
It is possible to continuously record motion picture to an SD card when there is no space available
in the built-in memory. (It allows you to record only to SD card from built-in memory.)
≥
Set [MEDIA SELECT] to [Built-inMemory].
≥
Set [REC FORMAT] to [AVCHD]. (
)
≥
Insert an SD card.
≥
is displayed on the screen.
will disappear when space in the built-in memory is gone
and the recording to the SD card starts.
≥
Relay Recording can only be performed once.
≥
Combine the scenes that were relay-recorded using the [RELAY SCENE COMBINE] into
the SD card. (
)
≥
Once you have performed [RELAY SCENE COMBINE], you can use the Relay Recording
function again. If the [RELAY REC] is set to [ON] without performing the [RELAY SCENE
COMBINE], a message is displayed. You will be able to perform Relay Recording by touching
[YES], but you will not be able to perform the [RELAY SCENE COMBINE] after that.
≥
Still pictures are recorded to the SD card after Relay Recording.
≥
is displayed on the thumbnail display during the playback of the scene that was relay-
recorded on the built-in memory.
[PH]/[HA]/[HG]/[HE]:
(
A
B
)
Set the recording format to 1080/50i.
[1080/50p]
*3
:
Set the recording format to 1080/50p.
[2160/24p]:
Set the recording format to 2160/24p (72 Mbps).
[1080/24p]:
Set the recording format to 1080/24p (50 Mbps).
/
[RELAY REC]
: [RECORD SETUP]
#
[RELAY REC]
#
[ON]
WXF995M
VX985M
MENU
