- 112 -
≥
When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom rate.
≥
(audio input level meter) is displayed on the screen when [5.1ch/2ch] is set to [5.1ch], and
(audio input level meter) is displayed when [5.1ch/2ch] is set to [2ch] and [AUDIO
LEVEL]/[MIC LEVEL] is set to a setting other than [AUTO].
≥
You cannot record with the audio completely muted.
Adjust the quality of the image while recording.
Adjust by outputting to a TV while adjusting the quality of the image.
≥
This setting is retained when you change between Motion Picture Recording Mode and
Still Picture Recording Mode.
≥
Switch to Manual Mode. (
1
Select the menu.
2
Touch the desired setting items.
3
Touch
/
to adjust settings.
4
Touch [ENTER].
≥
Touch [EXIT] to complete the settings.
≥
appears on the screen.
Set the amount that focus moves when you rotate the Manual ring to adjust the focus.
[PICTURE ADJUST]
: [RECORD SETUP]
#
[PICTURE ADJUST]
[SHARPNESS]:
Sharpness of the edge
[COLOUR]:
Depth of the colour of the image
[EXPOSURE]:
Brightness of the image
[WB ADJUST]:
Picture colour balance
series/
series
[FOCUS RING SETTING]
: [RECORD SETUP]
#
[FOCUS RING SETTING]
#
desired setting
[SPEED]:
The focus value changes according to the speed that the Manual ring is
rotated.
[COARSE]:
The focus value changes according to the rotational position of the
Manual ring. The amount that focus moves when you rotate the Manual
ring is large, so this is suited to rough adjustments.
[FINE]:
The focus value changes according to the rotational position of the
Manual ring. The amount that focus moves when you rotate the Manual
ring is small, so this is suited to fine adjustments.
MENU
WXF1
VXF1
MENU
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 112 ページ 2018年2月22日 木曜日 午後12時30分