- 98 -
(For the
series/
series)
Night Mode ([Infrared])
≥
Remove the lens hood when you use Night Mode ([Infrared]).
≥
Do not use
([Infrared]) in a bright location. Doing so may cause a malfunction.
≥
When
([Infrared]) is set, observe the following points:
j
Do not cover the infrared light with your hand or other object.
≥
The maximum distance that the infrared light can reach is approximately 3 m.
≥
You can record a clear image by positioning the centre area of the screen over the subject.
≥
When the remaining battery charge becomes low while
([Infrared]) is set, you cannot cancel
Night Mode or switch to
([COLOUR]).
You can change the level of image contrast correction in HDR Movie Mode. (
)
The icon changes each time you touch it.
(Low)
#
(High)
≥
(For the
series/
series)
When [
(HDR Effect)] is to be set in an Fn button with the [FN BUTTON SETTING], the
setting changes each time you press the Fn button.
≥
You cannot change the level of this effect when recording a motion picture or during PRE-REC.
≥
You may not see the full effect depending on the recording conditions.
This function detects the horizontal tilt of the unit, and automatically corrects it to the level
position.
Each touch of this icon switches Level Shot Function.
(Normal)
#
(Strong)
#
Off
≥
(For the
series/
series)
When [
(Level Shot Function)] is to be set in an Fn button with the [FN BUTTON SETTING],
the setting changes each time you press the Fn button.
≥
The icon changes when the tilt exceeds the correction range.
≥
When the tilt exceeds the correction range, move the unit to the position where
/
is
displayed.
HDR Effect
(Low):
Sets the correction level to low.
(High):
Sets the correction level to high.
Level Shot Function
(Normal):
Corrects the tilt.
(Strong):
Strengthen tilt correction.
Off:
Cancel the setting.
/
When the tilt is corrected
/
/
/
When the tilt is above the correction range
WXF1
VXF1
WXF1
VXF1
WXF1
VXF1
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 98 ページ ２０１８年２月２２日 木曜日 午後１２時３０分
