- 204 -
This will set/clear the Password to limit the startup of the Wi-Fi setting menu.
By setting the Password, it will prevent erroneous operation, prevent wrongful use of the Wi-Fi
function by third party, and protect the set personal information.
1
Touch [Setup].
2
Touch [INPUT], and enter the Password (6 characters).
≥
After finish entering the Password, touch [Enter].
≥
If the Password has already been set,
is displayed.
≥
For details on how to enter characters, refer to page
.
3
Touch [NEXT].
4
Touch [INPUT], and enter the same Password again.
≥
After finish entering the Password, touch [Enter].
≥
If the Passwords match with each other, a message is displayed.
5
Touch [EXIT].
≥
If you set the Wi-Fi Password, you will need to enter the Password each time you touch [Wi-Fi
Setup] on the Wi-Fi home screen.
≥
When you forget your Wi-Fi Password, perform [Reset Wi-Fi Settings] from the Setup menu. This
will set the Wi-Fi setting to the condition at the time of purchase, and you will be able to use the
Wi-Fi setting menu. (
)
You can change the Wi-Fi setting back to the default condition.
≥
The “LUMIX CLUB” Login ID and Wi-Fi Password are also deleted.
≥
Information on wireless access points, smartphones, and Wireless Sub Cameras registered to
this unit is also deleted.
You can view and change this unit’s Device name (SSID), which is used for operating this unit as a
wireless access point.
1
Touch [INPUT], and enter the desired Device name (SSID).
≥
Input up to 20 characters are recommended. All the characters cannot be confirmed when
displaying the Device names on this unit if a long Device name is used. (
,
≥
For details on how to enter characters, refer to page
.
≥
Touch [Enter].
2
Touch [EXIT].
≥
If you are going to connect directly to a smartphone after changing the Device name (SSID), set
the connection again with the changed Device name (SSID). (
,
)
≥
The Password entered during the setting of direct connection cannot be changed. (
,
[Wi-Fi Password]
[Setup]/[Delete]
[Reset Wi-Fi Settings]
[Device Name]