- 27 -
∫
Attaching/Removing the lens hood
This will reduce the extra light entering the lens in bright sunlight or backlight etc., making it possible
to take clearer pictures.
How to attach the lens hood
1
Align the lens hood with this unit.
≥
Attach the lens hood so that you can see its LOCK
and UNLOCK arrows from above.
2
Rotate the lens hood’s mounting ring
A
to the LOCK side to tighten it.
How to remove the lens hood
Rotate the lens hood’s mounting ring to the UNLOCK side
to loosen and remove it.
≥
When using a Filter Kit (optional) or Conversion Lens (optional), remove the lens hood.
≥
Remove the lens hood when you use Night Mode ([Infrared]). (
)
∫
Attaching/Removing the eyecup
If you remove the eyecup, rotate it anti-clockwise by 180
o
and re-attach it, you can also use it with
your left eye. The eyecup is attached in the orientation for right eye use at the time of purchase.
1
While holding the viewfinder, pull the eyecup in the direction of arrow to
remove it.
2
Attach the eyecup by aligning the groove
A
on the eyecup mount with the
inner ridge
B
of the eyecup.
