manualshive.com logo in svg

Panasonic HC-X2, Operating Instructions Manual

The Panasonic HC-X2, a top-of-the-line camcorder, offers superior video quality and professional-grade features. For a hassle-free user experience, refer to the comprehensive Operating Instructions Manual available for free download on our website, ensuring optimal utilization of this remarkable product.

Share
Download
background image

Notes – Warning system

292

Warning system

When an error is detected right after the unit is turned on or during the operation, the occurrence of the error is notified in the 
camera image screen of the LCD monitor or by the tally lamps. Deal with the error by following the indications.

™

Cases indicated by error messages

*1 Displayed when using 

.

*2 Displayed when using 

.

System error

Warning

Screen display

Description

Behavior and cause

Camera image screen

[SYSTEM ERROR]

An error in the standard signal or 
communication error has occurred.

All of the tally lamps and the card access lamps (orange) 
flash 4 times each second, and an alarm sounds.

•

Set the power switch to <OFF> and turn off the power.

Screen display

Description

Behavior and cause

Camera image screen

[LOW BATTERY]

Remaining battery level is insufficient. All of the tally lamps and the card access lamps (orange) 

flash 4 times each second, and an alarm sounds.
The power status display becomes 

, and it will flash once 

every second in red.

•

The power is turned off in approximately 5 seconds.

•

Replace with a fully charged battery, or connect the AC 
adaptor.

[HIGH TEMPERATURE]

Displayed when the internal 
temperature of the main unit has risen 
above assumed.

All of the tally lamps and the card access lamps (orange) 
flash 4 times each second, and an alarm sounds.

•

The power is turned off in approximately 5 seconds.

•

Turn on the power again and check recording and playback 
operations. If the problem persists, consult the dealer.

[FAN STOPPED]

The fan has stopped.

•

Recording is stopped.

•

The power turns off approximately 1 minute later.

•

Stop the use immediately when the fan has stopped, and 
consult the dealer.

•

If the fan has stopped, temperature of the unit will rise. 
Therefore, do not use the unit for a long period of time.

[REC WARNING]

An error of the recording data has 
occurred during recording, and the 
recording has stopped.

All of the tally lamps and the card access lamps (orange) 
flash 4 times each second, and an alarm sounds.

•

Recording is stopped.

It has tried to record exceeding the 
maximum number of clips during 
recording.

All of the tally lamps and the card access lamps (orange) 
flash 4 times each second, and an alarm sounds.

•

Recording is stopped.

•

[REC WARNING] [<OVER MAX NUM. OF CLIPS>] is 
displayed in the warning display field of the STATUS 
screen for the mode check.

•

Replace the memory card or delete unnecessary clips.

[Below functions are temporarily 
disabled due to a rise of the camera’s 
internal temperature. Please wait for 
the camera to cool down.
- VIDEO RECORDING
- PRE REC
- USB TETHERING]

*1

Displayed when the internal 
temperature of the main unit has risen 
above assumed.

All of the tally lamps and the card access lamps (orange) 
flash 4 times each second, and an alarm sounds.

•

Recording stops if it was in progress.

•

Streaming stops if streaming via USB tethering was in 
progress.

•

[RECORDING] menu 

¨

 [PRE REC] is fixed to [OFF]

•

Wait until the temperature of the unit decreases.

[Below functions are temporarily 
disabled due to a rise of the camera’s 
internal temperature. Please wait for 
the camera to cool down.
- VIDEO RECORDING
- PRE REC
- USB-LAN]

*2

Displayed when the internal 
temperature of the main unit has risen 
above assumed.

All of the tally lamps and the card access lamps (orange) 
flash 4 times each second, and an alarm sounds.

•

Recording stops if it was in progress.

•

Streaming stops if streaming via a USB ethernet adaptor 
was in progress.

•

[RECORDING] menu 

¨

 [PRE REC] is fixed to [OFF]

•

Wait until the temperature of the unit decreases.

Summary of Contents for HC-X2


























































































































































































































































































































Reviews:

No comments

Related manuals for HC-X2

Datavideo BC-15P Instruction Manual preview
BC-15P
Brand: Datavideo Pages: 108
Sony VCL-TW25 Operating Instructions preview
VCL-TW25
Brand: Sony Pages: 2
3M Digital Media System 700 Series Operator And Product Safety Manual preview
Digital Media System 700 Series
Brand: 3M Pages: 288
Iget SECURITY M3P15 Quick Start Manual preview
SECURITY M3P15
Brand: Iget Pages: 2
Samsung HMX-F90BP User Manual preview
HMX-F90BP
Brand: Samsung Pages: 110
Panasonic AG-DVX200EJ Operating Instructions Manual preview
AG-DVX200EJ
Brand: Panasonic Pages: 52
Samsung SCL540 Owner'S Instruction Manual preview
SCL540
Brand: Samsung Pages: 70
Samsung SC-D385 User Manual preview
SC-D385
Brand: Samsung Pages: 112
Samsung HMX-S15BP User Manual preview
HMX-S15BP
Brand: Samsung Pages: 160
JVC Everio GZ-VX815AH Basic User'S Manual preview
Everio GZ-VX815AH
Brand: JVC Pages: 40
JVC Everio GZ-VX755 Detailed User Manual preview
Everio GZ-VX755
Brand: JVC Pages: 222
JVC Everio GZ-VX505 Basic User'S Manual preview
Everio GZ-VX505
Brand: JVC Pages: 20
JVC Everio GZ-V515BEK Basic User'S Manual preview
Everio GZ-V515BEK
Brand: JVC Pages: 12
JVC EVERIO GZ-VX815 Detailed User Manual preview
EVERIO GZ-VX815
Brand: JVC Pages: 260
JVC GR-D340AC Instructions Manual preview
GR-D340AC
Brand: JVC Pages: 44
JVC GR-D338AH Instructions Manual preview
GR-D338AH
Brand: JVC Pages: 44
JVC GR-D33 - MiniDV Camcorder With 16x Optical Zoom Instructions Manual preview
GR-D33 - MiniDV Camcorder With 16x Optical Zoom
Brand: JVC Pages: 76
JVC GR-D340 Instructions Manual preview
GR-D340
Brand: JVC Pages: 44

Brands by name

Popular brands

Load more brands