85
VQT4C76
∫
To set the White Balance manually
1
Select
, fill the screen with a white subject.
2
Touch and set the blinking
.
≥
When using the viewfinder, press and hold the
CAMERA FUNCTION button.
≥
When the screen turns black instantly and the
display
stops flashing and then lights constantly, the setting is
complete.
≥
If the
display continues flashing, the White Balance cannot be set. In this case, use
other White Balance Modes.
≥
When the
display flashes, the Manual White Balance previously adjusted is stored.
Whenever recording conditions change, re-set the White Balance.
≥
When setting both the White Balance and the iris/gain, set the White Balance first.
≥
is not displayed on the screen when
is being set.
Manual shutter speed/iris adjustment
Shutter Speed:
Adjust it when recording fast-moving subjects.
Iris:
Adjust it when the screen is too bright or too dark.
≥
Press the iA/MANUAL button or the CAMERA FUNCTION button to switch to Manual
Mode. (
l
83)
For how to perform the settings when using the viewfinder, refer to page 84.
≥
Press the iA/MANUAL button to switch to Manual Mode. (
l
83)
1
Touch [SHTR] or [IRIS].
2
Touch
/
to adjust settings.
≥
Touch [SHTR]/[IRIS] to complete the adjustments.
Shutter speed:
1/60 to 1/8000
≥
If [AUTO SLOW SHTR (2D)] is set to [ON], the shutter speed will be set between 1/30 and
1/8000.
≥
If [DIGITAL CINEMA] is set to [ON], the shutter speed will be set between 1/48 and 1/8000.
(When [AUTO SLOW SHTR (2D)] is set to [ON], the range is 1/24 to 1/8000.)
≥
The shutter speed closer to 1/8000 is faster.
≥
The shutter speed will be set between 1/2 and 1/2000 in Still Picture Recording Mode.
Iris/Gain value:
CLOSE
!#
(F16 to F1.7)
!#
OPEN
!#
(0dB to 18dB)
≥
Value closer to CLOSE darken the image.
≥
Value closer to 18dB brighten the image.
FOCUS
WB
SHTR
IRIS
FOCUS
WB
SHTR
IRIS
MNL
HC-X900M
AWB
AWB
HC-X900M
HC-X800
SHTR
IRIS
HC-X900M&X800P&PC&PU-VQT4C76_mst.book 85 ページ ２０１２年１月１１日 水曜日 午後１０時６分
