- 153 -
Colour balance of
images is strange when
recording in a place
such as a gymnasium.
≥
In a place with multiple light sources, such as a
gymnasium or a hall, set the White Balance setting to
(Indoor mode 2). If you cannot record clearly with the
(Indoor mode 2), set it to
(Manual adjustment
mode). (
l
76)
Colour or brightness of
the image changes, or
you may see horizontal
bars in the image.
The LCD monitor flickers
indoors.
≥
Colour or brightness of the image may change, or you
may see horizontal bars in the image when the object is
recorded under fluorescent light, mercury light or sodium
light, etc., but this is not a malfunction.
≥
In Motion Picture Recording Mode, record in Intelligent
Auto Mode or set the shutter speed to 1/100 in areas
where the power supply frequency is 50 Hz, or 1/125 in
areas of 60 Hz.
≥
In Still Picture Recording Mode, this will not affect the
recorded image.
Playback
Problem
Check points
Scenes/still pictures
cannot be played back.
≥
Any scenes/still pictures where the thumbnails are
displayed as
cannot be played back.
Scenes cannot be
deleted.
≥
Release the protect setting. (
l
101)
≥
Any scenes/still pictures where the thumbnails are
displayed as
cannot be deleted. If the scenes/still
pictures are unnecessary, format the media to erase the
data. (
l
41) Please be aware that if a media is formatted
then all the data recorded on the media is erased and
cannot be recovered. Back up important data on a PC,
disc etc.
Recording
Problem
Check points
HC-X900&X900M&X800EP-VQT4D01_mst.book 153 ページ ２０１２年１月１２日 木曜日 午前１０時４４分
