84
Setup menus
The underlining (__) denotes the factory setting mode.
<OPERATION>
No./Item
Description of setting
100
SEARCH ENA
For selecting the direct search dial operation.
0000
DIAL:
Direct search dial operations are performed.
0001
KEY:
Operation does not transfer to the search
mode unless the SHTL, JOG or VAR button is
pressed.
101
SHTL MAX
For selecting the maximum speed of shuttle
operations.
0000
k
9.8:
k
9.8 times normal speed
0001
k
16:
k
16 times normal speed
0002
k
32:
k
32 times normal speed
<Note>
Depending on the tape format, the actual tape running
speed differs slightly from what is indicated by the
superimposed display
.
102
FF. REW MAX
For setting the maximum speed of fast
forward and rewind operations.
0000
k
16:
k
16 times normal speed
0001
k
32:
k
32 times normal speed
0002
k
50:
k
50 times normal speed
0003
k
60:
k
60 times normal speed
0004
k
100:
k
100 times normal speed
<Note>
The maximum speed is automatically limited to 50x for
the DVCPRO HD and DVCPRO50 format and to 32x for
the DV and DVCAM formats.
104
REF ALARM
For selecting whether a warning is to be
displayed when the REF VIDEO signal has not
been connected.
0000
OFF:
A warning is not displayed.
0001
ON:
A warning is displayed by the
blinking STOP lamp.
105*
1
AUTO EE SEL
For selecting the VTR mode which is to be set
to the EE mode when “0 (EE)” is selected as
the setup menu item No.140 (OUTPUT)
setting.
0000
S/F/R:
The EE mode is established when the VTR is
in the STOP, FF or REW mode.
0001
STOP:
The EE mode is established when the VTR is
in the STOP mode only.
106
EJECT EE SEL
For selecting the video and audio output
statuses in the EJECT mode.
0000
EE:
The EE mode is always established regardless of
the setup menu item No.140 (OUTPUT) setting.
0001
BLACK:
When setup menu item No.140 (OUTPUT) is set to:
“EE”
:
The EE mode is established
.
“
TAPE”
:
The BLACK mode is established for
the video signals, and the audio
signals are muted.
0002
GRAY:
When setup menu item No.140 (OUTPUT) is set to:
“EE”
:
The EE mode is established
.
“
TAPE”
:
The GRAY mode is established for the
video signals, and the audio signals
are muted.
<Note>
If 0 (EE) is selected while the 23/24 Hz or 25 Hz (HD or
SD) mode has been selected as the system menu item
No.25 (SYSTEM FREQ) setting, the VTR construes that
1 (BLACK) has been selected.
107*
1
EE MODE SEL
For selecting what signals are to be output
when the EE mode is established.
0000 NORMAL:
Signals delayed by an amount equivalent to the time taken
for the signals to be processed internally are output.
0001
THRU:
The signals are not processed internally but output in their
original form with no delay.
<Note>
The internal operation forcibly sets “NORMAL” when an
editing mode is selected or when SDTI is selected
during video input signal selection.
111*
1
MEMORY
STOP
For selecting whether to automatically stop the
VTR when the counter value is at the “0” position
during CTL mode FF and REW operations.
0000
OFF:
The VTR does not stop.
0001
ON:
The VTR is automatically stopped.
<Notes>
•
Either the stop or still picture (SHTL STILL or VAR
STILL) mode, whichever has been set using setup
menu item No.307 (AFTER CUE-UP), is
established when the VTR is stopped.
•
If both the AUTO REW function and MEMORY
function have been selected at the same time, the
AUTO REW operation takes priority.
110
AUTO REW
For selecting whether the tape is to be
automatically wound back to its beginning
when the tape-end has been detected.
0000
OFF:
The tape stops when it reaches the
tape-end.
0001
ON:
The tape is rewound to its beginning.
109*
1
CAP. LOCK
For selecting whether to engage playback framing
lock in 4-field increments or in 2-field increments.
<59/60Hz>
<50Hz>
0000
2F
0000
2F
0001
4F
0001
4F
0002
8F
108
PLAY DELAY
For setting the play startup time in 1-frame
increments.
0000
0
:
:
0015
15
No./Item
Description of setting
*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or
SD) mode has been selected as the system menu item No.25
(SYSTEM FREQ) setting.
Summary of Contents for HD1700pe
Page 133: ...133 ...
