23
VQT1A24
Before using
Adjust the length of the grip belt so that it fits your
hand, and hold it properly.
1
Flip the belt.
2
Put your hand through the grip belt.
A
Rubber grip
1
Loosen the belt.
2
Put your hand through the belt as far as it
goes.
≥
Slip your hand through the belt as far as it
goes so that your fingers will grip the
rubber area firmly.
3
Replace the belt.
≥
Tighten up the belt so that your hand
remains firmly in place.
Rotate the lens hood
counter-clockwise
A
to remove it. In
order to attach it, place into slot
B
,
and then rotate it clockwise
C
.
The tripod receptacle is a hole used to mount a
tripod for the unit. Use of Panasonic’s VW-CT45
(optional) standard tripod is recommended. (For
details on mounting the tripod, refer to the
operating instructions for the tripod.)
≥
You cannot use a tripod with a fixed tripod pin.
A
Camera base
B
Screw for mounting the unit
C
Tripod pin
≥
You can perform operations easily using the
remote control when the tripod is used. (
l
24)
≥
The battery cover cannot be opened when the
tripod is used. Insert the battery before
attaching this unit to the tripod. (
l
29)
Using grip belt
Lens hood
Tripod receptacle
A
C
B
VQT1A24_ENG_PP.book 23 ページ ２００７年１月２１日 日曜日 午後１時１７分
Summary of Contents for HDC-SD1
Page 139: ...139 VQT1A24 ...
