11
VQT1H62
Quick Guide
ª
Charging the battery
1
Connect the AC cable to the AC adaptor
and the AC outlet.
2
Put the battery on the battery mount by
aligning the mark, and then securely plug
it in.
≥
The output plug of the AC cable is not
completely connected to the AC adaptor jack.
As shown in
A
, there is a gap.
ª
Inserting the battery
1
While sliding the SD CARD/
BATTERY OPEN lever
A
, move the SD
card/battery cover and open it.
2
Insert the battery until it clicks while
paying attention to the direction of the
battery.
B
Push the center of the battery until it locks.
3
Close the SD card/battery cover.
≥
Securely close it until it clicks.
ª
Removing the battery
1
Open the SD card/battery cover.
2
Remove the battery.
≥
Move
A
in the direction of the arrow to unlock
it and then remove the battery.
3
Close the SD card/battery cover.
ª
How to turn on the power
While pressing the lock release button, set
the mode dial to
or
.
≥
Rotate the mode dial while at the same time
pressing in the lock release button
A
if
changing from OFF to another mode.
≥
Align with the status indicator
B
.
ª
How to turn off the power
Set the mode dial to OFF.
A
A
1
2
B
A
A
B
VQT1H62_ENG_PP.book 11 ページ ２００７年７月１７日 火曜日 午後５時４４分
