42
VQT1H62
Recording
ª
About auto mode
Set the AUTO/MANUAL/FOCUS switch to
AUTO, color balance (white balance) and
focusing will be adjusted automatically.
j
Automatic white balance (
l
127)
j
Auto focus (
l
128)
Depending on the brightness of the subject etc.,
the aperture and shutter speed are automatically
adjusted for an optimum brightness.
(The shutter speed is adjusted to a maximum of
1/250 in recording mode.)
≥
Color balance and focus may not be adjusted
automatically depending on light sources or
scenes. If so, manually adjust these settings.
j
Scene mode setting (
l
59)
j
White balance setting (
l
61)
j
Shutter speed setting (
l
63)
j
Iris/gain value setting (
l
63)
j
Manual focus setting (
l
60)
This function prevents unnecessary recording
when you forget to pause recording and walk
with the unit tilted upside down while recording
continues.
≥
If the unit continues to be tilted upside down
from the normal horizontal position while
recording motion pictures, it is automatically
put into recording pause.
Turning the AGS function on/off
¬
Rotate the mode dial to select
.
Press the MENU button, then select
[VIDEO]
#
[AGS]
#
[ON] or [OFF]
and press the cursor button.
≥
This function’s default setting is [OFF].
≥
The AGS function may activate and cause the
unit to pause the recording if you are recording
a subject right above or right below you. In
these cases, set [AGS] to [OFF] then continue
the recording.
≥
Use the recording start/stop button to pause
the recording. The AGS function is only a
backup function for when you forget to pause
the recording.
≥
The time it takes the unit to be put into
recording pause after being tilted upside down
varies depending on the operating conditions.
AUTO
MANUAL
FOCUS
Auto Ground-Directional Standby
(AGS)
VQT1H62_ENG_PP.book 42 ページ ２００７年７月１７日 火曜日 午後５時４４分
